![]() ![]() You could bench test it or, if you have the tools, inspect it internally. With the bad drive removed, it’s time to decide if it can be repaired. An extra step of prevention can save a lot of headaches. While some Synology NAS systems allow for operating removal or hot-swapping, don’t take the chance, even when doable. Doing otherwise could cause severe data shear and loss. Don’t go yanking out a drive until it is entirely shut down and turned off. This allows your system to be up and running instead of waiting for your diagnosis. Have a fresh drive ready and waiting to swap in when the bad one is pulled. With the bad drive identified, it’s time for shutdown and removal. Step 2: Shut down your NAS and remove the drive However, even when this says normal if the internal warning systems are triggered, the drive itself will still make audible noises such as buzzing or loud humming. In the Storage Manager, click on the HDD/SSD link on the left side.Ī list of the drives will display, and you can see their status as Normal in green, or Crashed or Failed in red letters. It looks like a silver barrel with a multi-color life-preserver ring in front of it. ![]() Once in the menu, click on the Storage Manager icon. Even if the sound is turned off, your system should be giving you Synology notices about the volume becoming degraded on the damaged drive and steps needing to be taken immediately.įrom the software, the failing drive can be identified under the DiskStation Manager and initiating the main menu button in the left upper corner of the screen. Look for the drive that is beeping audibly. The failing drive in a Synology system is easy to find. If the drive still works but is at risk of dying, copy as much of the data off it as possible before it fails. How to replace a failed hard drive in Synology NAS Data recovery off a dead drive could run in the thousands of dollars. If nothing at all, just accept that if the drive is entirely failed, the data may very well be lost. If not, then confirm where the data was backed up. If your system was utilizing a RAID approach, the data should be protected. Replacing a failed hard drive in a Synology NAS starts with first ascertaining your preservation status, essentially the system used for backing up your system data. Listen for beeping sounds from your Synology.Keep an eye on disappearing files, freezing, and corrupted data messages.Tips to prepare and prevent hard drive failures.How should I format my external hard drive for Synology NAS?.How do I identify the drives on my Synology NAS that failed?.The drive gets booted from the storage volume.Get notified by email from the Synology device.How do we know if our hard drive has failed?.Step 4: If the drive cannot be repaired, replace it.Step 2: Shut down your NAS and remove the drive.How to replace a failed hard drive in Synology NAS. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |